街头烈战

街头烈战> 产品中心> 纯水树脂

超纯水抛光树脂MB-115

MIXED BED ION EXCHANGE RESIN FOR ULTRA PURE APPLICATION

Tulsimer? MB-115 is a mixture of strong acid cation exchange resin Tulsimer? T-46 (H) and

strong base anion exchange resin Tulsimer? A-33OH in 1:1.5 volumetric ratio.

Tulsimer? MB- 115  is a specially designed as a polisher to obtain low conductivity water

Tulsimer? MB-115 is the ideal choice for electronic industries, which manufacture semi conductors

and television tubes etc. where ultra pure water is required.

超纯水树脂

TYPICAL CHARACTERISTICS OF TULSION：Tulsimer ?MB-115


TULSION?T-46

TULSION?A-33

Type

Strong acid cation exchange resin

Strong base anion exchange resin

Matrix Structure

Cross linked polystyrene

Cross linked polystyrene

Functional Group

Sulfonic acid

Quaternary ammonium Type I

Physical Form

Moist spherical beads

Moist spherical beads

Ionic form supplied

Hydrogen

Hydroxide

Screen Size

U.S.mesh(wet)

16 to 50

16 to 50

Particle Size

0.3 to 1.2 mm

0.3 to 1.2 mm

Fines Content

Less than 0.3 2% passing

through 40 U.S.mesh

Less than 0.3 2% passing through 40 U.S.mesh

Total exchange capacity

1.8 meq/ml minimum of 99% in hydrogen form

1.0 meq/ml minimum of 90% in OH form and less than 1% in Cl form

pH range

0 to 14

0 to 14

Temperature stability

120°C

80°C

Solubility

Insoluble in all common solvents

Insoluble in all common solvents

Organic leachables

Less than 0.2 mg KMNO4 per ml of wet resin

Less than 0.2 mg KMNO4 per ml of wet resin

Backwash settled density

Approx.750 gm/liter

Impurities

Fe=50 ppm(max)

Fe=50 ppm(max)


Cu=50 ppm(max)

Cu=50 ppm(max)


Pb=50 ppm(max)

Pb=50 ppm(max)

Bead strength

Avg. not less than 500g/bead by Chatillon test

Avg. not less than 300g/bead by Chatillon test

                                 

TESTING

The sampling and testing of ion exchange resin is done as per standard testing procedures, namely ASTMD-2187 and IS-7330, 1998.

 

PACKING

Super Sack

1000 lit

Super Sack

35 cft

MS drums

180 lit.

Fiber Drums

7 cft

HDPE lines Bags

25 lit.

HDPE Lined Bags

1 cft

   

For Handling, Safety and Storage requirements please refer to the individual Material Safety Data Sheets available at our offices. The data  included herein are based on test information obtained by Thermax Limited. These date are believed to be reliable, but do not imply any warranty or performance guarantee. Tolerances for characteristics are per BIS/ASTM. We recommend that the user should determine the performance of the product by testing on his own processing equipment.

For further information, please contact:

http://175.29.253.2/@admin/index.html#/